Peso | 0,050 kg |
---|
Hobbywing Pinion 12 Teeth 32 Pitch 5mm Shaft
7,98 € c/iva. - Preço exclusivo online
Hobbywing Sensor Convertor Cable Konverter JST Port-Motor
6,50 € c/iva. - Preço exclusivo online
Hobbywing Pinion 13 Teeth Modul1 5mm Shaft
Preço em loja: 8,40 €
7,15 € c/iva. - Preço exclusivo online
Disponível por encomenda - 3 a 5 dias
Informação adicional
Avaliações (0)
Apenas clientes com sessão iniciada que compraram este produto podem deixar opinião.
Produtos Relacionados
Gear, 12T pinion (32P), heavy duty (h.steel) set screw
Preço em loja: 8,95 €
6,94 € c/iva. - Preço exclusivo online
Hobbywing Pinion 23 Teeth 48 Pitch 5mm Shaft
Preço em loja: 8,80 €
7,25 € c/iva. - Preço exclusivo online
Robitronic Tankflasche XL – Hobby
Preço em loja: 7,10 €
5,75 € c/iva. - Preço exclusivo online
The new XL Robitronic fuel bottle is made of soft, very elastic material to ensure quick and easy fuel stops. Enough fuel to be able to spend several tanks of fuel without waiting time. The bottle has a screw cap and an aluminum fuel tank filler neck with rubber seal. The aluminum filler neck reaches every tank and gray-transparent bottle design gives instant information on the rest of contents.
SkyRC Digital Camber Gauge for 1/10
Preço em loja: 51,90 €
42,50 € c/iva. - Preço exclusivo online
With the SkyRC digital camber gauge, both camber and toe angle of a 1/10 RC touring car can be measured and the data sent directly to Your smartphone via Bluetooth connection. All you need is the free app "RC Gears" in order to finally start fine-tuning the wheels like a pro!
With the digital camber gauge, You can fine-tune your camber and camber gain settings with the assurance that an accurate, repeatable, and trusted measurement tool is being used for every operation. Whether on your setup bikes, in a break of a race or in the workshop - You will receive precisely aligned wheels and, furthermore, the associated camber angles. Fine tuning and camber adjustment allow You to achieve the most perfect tire wear and traction point.
SkyRC Ride Height Gauge 3.8mm Black
Preço em loja: 13,90 €
11,00 € c/iva. - Preço exclusivo online
With this gauge you can measure the right height of your car, or let`s say you can measure the clearance between the chassis bottom and the ground. Similar than the chassis droop the right height take effect on the rolling of the chassis, the traction and the speed you can have through a corner.
Technical Data:
- Measurement Range: 3,8 - 7mm
- Steps by: 0,2mm
SkyRC Ride Height Gauge 4mm Black
Preço em loja: 15,90 €
12,50 € c/iva. - Preço exclusivo online
To measure the chassis droop correctly and precise you will need a chassis droop gauge. With this tool you can measure the positive and negative chassis droop as well. The chassis droop is one of the most important setup parameter as this take effect on the chassis rolling as well as on the weight balance during acceleration and braking and in corners.
Technical Data:
- Measurement range: 4 - 6,6mm
- Step: 0,2mm
SkyRC Setup Tool Buggy 1/10 Blue
Preço em loja: 122,00 €
105,00 € c/iva. - Preço exclusivo online
SkyRC Tire Sander Black
Preço em loja: 53,90 €
46,50 € c/iva. - Preço exclusivo online
Thanks to the SkyRC RTS001 tire sander in black, the seam in the middle of a new tire gets removed easily and quickly. Briefly pulled up and turned on, the seam can be removed in a very short time with a piece of sandpaper. An excellent alternative for those who don't want to take 2-3 laps on the track first. After all, the seam found around a new tire can negatively affect the car's handling. After the seam has been removed, the RC car has way more grip, which pays off particularly in turns and clearly reduces rollovers too.
SkyRC's tire sander is equipped with a high-precision adapter. The handy design also makes it easy to grind the tires in almost any place, as long as a 12V power supply is available or a 2S LiPo battery is at hand.
Thanks to the SkyRC RTS001 tire sander in black, the seam in the middle of a new tire gets removed easily and quickly. Briefly pulled up and turned on, the seam can be removed in a very short time with a piece of sandpaper. An excellent alternative for those who don't want to take 2-3 laps on the track first. After all, the seam found around a new tire can negatively affect the car's handling. After the seam has been removed, the RC car has way more grip, which pays off particularly in turns and clearly reduces rollovers too.
SkyRC's tire sander is equipped with a high-precision adapter. The handy design also makes it easy to grind the tires in almost any place, as long as a 12V power supply is available or a 2S LiPo battery is at hand.
Avaliações
Ainda não existem avaliações.