Peso | 0,050 kg |
---|
Hobbywing Pinion 23 Teeth 48 Pitch 5mm Shaft
7,25 € c/iva. - Preço exclusivo online
Hobbywing Pinion 12 Teeth 32 Pitch 5mm Shaft
7,98 € c/iva. - Preço exclusivo online
Hobbywing Pinion 25 Teeth 48 Pitch 5mm Shaft
Preço em loja: 8,80 €
7,25 € c/iva. - Preço exclusivo online
This pinion gear is made of hard anodized chrome steel, it’s 48-53HRC certified.
Material | 40CR Steel |
Bore | 5mm |
Modulus | 0.53 |
Application | 1:10 SCT, Truck, Monster Truck |
Disponível por encomenda - 3 a 5 dias
Informação adicional
Avaliações (0)
Apenas clientes com sessão iniciada que compraram este produto podem deixar opinião.
Produtos Relacionados
Gear, 15T pinion (32P), heavy duty (h.steel) set screw
Preço em loja: 8,95 €
6,94 € c/iva. - Preço exclusivo online
Hobbywing Pinion 21 Teeth 48 Pitch 5mm Shaft
Preço em loja: 8,80 €
7,25 € c/iva. - Preço exclusivo online
SkyRC Angle Gauge 3pcs for planes
Preço em loja: 104,00 €
87,50 € c/iva. - Preço exclusivo online
It's all about the angle: And with the protractors by SkyRC, fine-tuning in real time is no longer a problem at all! Setting the surface angle for a model airplane is a top priority, as many amateur pilots know. The positions of the different rudders play a significant role.
Instead of measuring these angles mechanically as usual, the digital protractors show all relevant data on the smartphone. When optimizing, even small changes can have a big impact, so the best possible accuracy is recommended. Consisting of three sensor modules that are controlled wirelessly via Bluetooth and the "RC Gears" app, pilots can finally take off with a clear conscience.
SkyRC Center Gravity and Angle Gauge for planes
Preço em loja: 295,00 €
268,50 € c/iva. - Preço exclusivo online
This set consisting of the three center of gravity gauges and three angle gauges is an unbeatable combination when it comes to optimally preparing fixed-wing aircraft for the next flight. First determine the center of gravity with the sensor gauge, connect the protractors to the various oars and the first tests can begin via the real-time view on the smartphone.
In the "RC Gears" app by SkyRC You can easily read off the various weights measured and receive suggestions on how to optimally adjust the center of gravity. With the protractors on the rudders, on the other hand, You can follow the angles via the app with a tolerance of 2° and how much they change. Everything was designed with the idea of giving pilots the ability to work as accurately as possible. And all of this conveniently with the smartphone. A true revolution in technology!
SkyRC Center Gravity for planes
Preço em loja: 256,00 €
230,00 € c/iva. - Preço exclusivo online
With this center of gravity gauge it is possible to quickly and easily determine the center of gravity of a flight model. Finding and using it can be one of the most difficult tasks if you want to do a few laps in a plane. This is ensured by three individual measurement modules that can be controlled wirelessly via Bluetooth and forward the data to the RC Gears smartphone app for a perfect overview
SkyRC Chassis Drop Block Black
Preço em loja: 17,90 €
14,25 € c/iva. - Preço exclusivo online
To measure the chassis droop correctly and precise you will need a chassis droop gauge. With this tool you can measure the positive and negative chassis droop as well. The chassis droop is one of the most important setup parameter as this take effect on the chassis rolling as well as on the weight balance during acceleration and braking and in corners.
Scope of Supply:
2x Support Blocks with a height of each 10mm
SkyRC Setup Tool Touring Car Black
Preço em loja: 122,00 €
105,00 € c/iva. - Preço exclusivo online
SkyRC Tire Sander Blue
Preço em loja: 53,90 €
46,50 € c/iva. - Preço exclusivo online
Thanks to the SkyRC RTS001 tire sander in blue, the seam in the middle of a new tire gets removed easily and quickly. Briefly pulled up and turned on, the seam can be removed in a very short time with a piece of sandpaper. An excellent alternative for those who don't want to take 2-3 laps on the track first. After all, the seam found around a new tire can negatively affect the car's handling. After the seam has been removed, the RC car has way more grip, which pays off particularly in turns and clearly reduces rollovers too.
SkyRC's tire sander is equipped with a high-precision adapter. The handy design also makes it easy to grind the tires in almost any place, as long as a 12V power supply is available or a 2S LiPo battery is at hand.
Avaliações
Ainda não existem avaliações.