Technical Specs Mamba Micro X2 ESC | |
---|---|
Input Voltage Range: | 2S-4S LiPo (16.8V Max) *2S-3S with included motor |
BEC Specifications: | 2A Peak, 5.5v or 7.5v (5.5v default) |
Operating Environment: | Waterproof* design allows for use in nearly any environment; included CC BEC is not waterproof. |
Brake: | Proportional |
Reversible: | Yes, but may be disabled |
On/Off Switch: | Yes, waterproof |
Cooling Fan: | Coming soon, uses 25mm size fan |
Size (L x W x H): | 41.6 mm x 29.4 mm x 21.3 mm (1.64″ x 1.16″ x .84″) |
Weight (with wires): | 1.66 oz / 47 grams |
Connectors: | 4.0 mm bullets |
Items Needed for Operation: | Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended. |
Product Use Statements: |
|
Programmability: | Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) |
Telemetry Link Capable: | Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. |
Tech Notes: |
If running on 4s, and using two 2s LiPos in series, please refer to this BEC wiring diagram.
*Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. |
Technical Specs 1406-2850Kv Sensored Motor | |
---|---|
Input Voltage Range: | 2S-4S LiPo |
Kv: | 2850 |
Max. RPM: | 100,000 |
Size: | Length: 49.5mm Diameter: 36mm |
Weight (w/wires): | 197 g / 6.9oz |
Shaft Size: | Length: 15mm Diameter: 1/8″ (3.17mm) |
Mounting Hole Specifications: | M3 @ 25mm |
Cooling Fan: | Optional – Coming Soon |
Connectors: | 4mm male Castle Bullet Connectors |
Application Guidelines: | Ideal for 1:10 scale low speed rock crawlers/trail runners on 2S-3S weighing less than 8lbs. Can also be used in more aggressive setups in lighter 1:10 scale touring cars, stadium trucks or buggies weighing up to 5lbs. |
Max. Recommended Vehicle Weight: | 8lbs when used for low speed/moderate driving style like rock crawling and trail running; 5lbs for more racing and aggressive driving styles. |
Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. |
Avaliações
Ainda não existem avaliações.