Electronic Speed Control (ESC) | |
Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo (25.2V) (4s max with included 1900kv motor) |
BEC Specifications: | Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V |
Operating Environment: | Waterproof* design allows for use in nearly any environment. |
Brake: | Proportional |
Reversible: | Yes, but may be disabled for racing. |
On/Off Switch: | Yes |
Cooling Fan: | Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) |
Size: | Length: 2.14″ (54.4mm) Width: 1.39″ (35.2mm) Height: 1.18″ (30.0mm) |
Weight (with wires): | 3.56 oz. (101g) |
Connectors: | 4.0mm female bullets for motor connection. |
Items Needed for Operation: | Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. |
Product Use Statements: | *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
Max. Recommended Vehicle Weight: | Less than 9lbs, with batteries, ready-to-run with included 1406 – 1900kv motor in low speed crawlers; 5lbs maximum for more aggressive setups like rock racing and extended hill climbing |
Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software or a B-LINK Bluetooth Adapter (sold separately) and the Castle Link iOS App. |
Telemetry Link Capable: | Yes |
Tech Notes: |
|
Motor specs | |
Input Voltage Range: | 2S-4S LiPo |
Kv: | 2280 |
Max. RPM: | 100,000 |
Size: | Length: 49.5mm Diameter: 36mm |
Weight (w/wires): | 197 g / 6.9oz |
Shaft Size: | Length: 15mm Diameter: 1/8″ (3.17mm) |
Mounting Hole Specifications: | M3 @ 25mm |
Cooling Fan: | Optional – Coming Soon |
Connectors: | 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire. |
Application Guidelines: | Ideal for 1:10 scale low speed rock crawlers/trail runners on 2S-4S weighing less than 9lbs. Can also be used in more aggressive setups in lighter 1:10 scale touring cars, stadium trucks or buggies weighing up to 5lbs. |
Max. Recommended Vehicle Weight: | 9lbs when used for low speed/moderate driving style like rock crawling and trail running; 5lbs for more racing and aggressive driving styles. |
Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. |
Avaliações
Ainda não existem avaliações.