Peso | 0,015 kg |
---|
Rc4wd 15t 32p Hardened Steel Pinion Gear
8,67 € c/iva. - Preço exclusivo online
RC4WD Intimidator Pulling Sled
599,63 € c/iva. - Preço exclusivo online
Rc4wd 64t Delrin Spur Gear for R3 2 Speed Transmission
Preço em loja: 14,10 €
13,01 € c/iva. - Preço exclusivo online
Specifications:
- Heavy duty delrin material
- Engineered & Manufactured by RC4WD
- Direct replacement for R3 2 Speed
- Bore Size: 9.6mm
- Total Length: 5.6mm
- OD: 2.06in / 52.35mm
- Width: 0.21in / 5.5mm
- Weight: 0.28oz / 8g
What’s Included:
- 1x 64t Delrin Spur Gear for R3 2 Speed Transmission
Required Parts:
- R3 Scale Single Speed Transmission (Z-U0028)
Disponível por encomenda - 3 a 5 dias
EAN: 0610373641061
REF:
Z-G0055
Categorias: Acessórios, Cremalheiras, Eletronic Parts, Gearsbox/ transmission, Peças, Rc4wd, Spare Parts
Informação adicional
Avaliações (0)
Apenas clientes com sessão iniciada que compraram este produto podem deixar opinião.
Produtos Relacionados
Gear, 15T pinion (32P), heavy duty (h.steel) set screw
Preço em loja: 8,95 €
6,94 € c/iva. - Preço exclusivo online
Hobbywing Pinion 13 Teeth Modul1 5mm Shaft
Preço em loja: 8,40 €
7,15 € c/iva. - Preço exclusivo online
Hobbywing Pinion 21 Teeth 48 Pitch 5mm Shaft
Preço em loja: 8,80 €
7,25 € c/iva. - Preço exclusivo online
Hobbywing Pinion 23 Teeth 48 Pitch 5mm Shaft
Preço em loja: 8,80 €
7,25 € c/iva. - Preço exclusivo online
SkyRC Chassis Drop Block Black
Preço em loja: 17,90 €
14,25 € c/iva. - Preço exclusivo online
To measure the chassis droop correctly and precise you will need a chassis droop gauge. With this tool you can measure the positive and negative chassis droop as well. The chassis droop is one of the most important setup parameter as this take effect on the chassis rolling as well as on the weight balance during acceleration and braking and in corners.
Scope of Supply:
2x Support Blocks with a height of each 10mm
SkyRC Digital Camber Gauge for 1/10
Preço em loja: 51,90 €
42,50 € c/iva. - Preço exclusivo online
With the SkyRC digital camber gauge, both camber and toe angle of a 1/10 RC touring car can be measured and the data sent directly to Your smartphone via Bluetooth connection. All you need is the free app "RC Gears" in order to finally start fine-tuning the wheels like a pro!
With the digital camber gauge, You can fine-tune your camber and camber gain settings with the assurance that an accurate, repeatable, and trusted measurement tool is being used for every operation. Whether on your setup bikes, in a break of a race or in the workshop - You will receive precisely aligned wheels and, furthermore, the associated camber angles. Fine tuning and camber adjustment allow You to achieve the most perfect tire wear and traction point.
SkyRC Setup Tool Buggy 1/10 Blue
Preço em loja: 122,00 €
105,00 € c/iva. - Preço exclusivo online
SkyRC Working Stand 1/10 Black
Preço em loja: 28,90 €
23,50 € c/iva. - Preço exclusivo online
High quality and modern looking car stand for 1/10 & 1/12 On-Road chassis. The car will have a very stable and safe position based on the large footprint and the two rubber/foam stripes on the left and right side. The stand also has four holes to place shocks for maintenance or refilling as well as two measuring scales for fast measurement. The rectangular hole serves as a motor holder if you want to solder something more convenient.
It doesn't matter if you would like to lubricate the tires, cleaning or maintenance the car, with this stand you will manage everything very easily and within short time.
Avaliações
Ainda não existem avaliações.