Features:
- KV(rpm per volt) Shows the rpm per volt at a specific throttle position.
- U(VOLT) Shows the input voltage to the motor checker.
- RPM (revolutions per minute) Shows the engine speed at a specific throttle position.
- I(AMP) Shows the power consumption / power consumption at a specific guest position.
- MOTOR TIMING: Technical timing of the head, usually between 0 and 70 degrees, a special tool is required to adjust it.
- NOISE LEVEL: Poorly assembled motors, defective ball bearings and unbalanced rotors can cause vibrations. When an engine vibrates it creates pressure waves in the air which produce noise. This leads to lower engine performance.
- Phase A, B and C of the sensor are measured and displayed separately.
Scope of delivery:
- SKYRC Brushless Motor Analyzer
- Engine sensor cable
- Motor cable with 3.5mm banana plugs and crocodile clamps
- DC input cable with XT60 plug and 4mm banana plug
- DC input cable with XT60 connector and Tamiya connector
Technical data
- Dimensions (LxWxH): 136.5 x 80.6 x 24.5mm
- Weight: 282g (without cable)
- Input voltage: 7.4-8.4V (7.4V 2S 1P LiPo batteries are recommended)
- LCD display: Blue lighting, white text, 16 characters 2 lines
- KV accuracy: +/- 3%
- Motor Timing Accuracy: +/- 4%
- Motor timing range: 0-70°
- Noise level measurement range: 60dB – 120dB
- Supported Motors: Sensor & Sensorless Brushless Motor (2 poles to 36 poles)
- Power consumption less than 30A at 8.4V without load
Avaliações
Ainda não existem avaliações.