A mostrar 1–9 de 121 resultados
Ana-Digit Ltd AD Winch Controller
Preço em loja: 27,95 €
24,90 € c/iva. - Preço exclusivo online
PRODUCT INFORMATION:
- Features:
- Suitable for RC crawler winch Fully remote operated by 1 channel Selectable remote control by a 2-step or a 3-step button / switch 2 selectable button operating modes, i.e. cyclic and direct control Automatic rewind-end detection Winch speed control by a dial knob or a VR or a button with direct control 4 selectable sensitivity levels for rewind-end detection Power supplied from a servo cable Miniature size Perfectly match with AD-RC03
- Board Dimension:16mm x 32mm x 12mm Operating Voltage: BEC 5.0V / 6.0V Operating Current: Max 1.5A
Basic Lighting System for 2015 Land Rover Defender D90 Body Set (Pick-up/SUV)
Preço em loja: 23,50 €
21,68 € c/iva. - Preço exclusivo online
Specifications:
- 2x 5mm White LEDs
- 4x 3mm Yellow LEDs
- 3x 3mm Red LEDs
- 3x 3mm White LEDs
- 2x 2mm Yellow LEDs
- 2x 2mm Red LEDs
- DC Voltage: 4.5 V ~ 9 V
- Control Voltage: 7.4 V
- Operating Voltage: 7.4 V
- Wire Length: 24.3in / 619mm
- Total Weight: 1.26oz / 36.0g
Castle – CC Bec 10A – max. Input 25V – 6S
Preço em loja: 36,95 €
33,50 € c/iva. - Preço exclusivo online
Castle – CC Bec 2 – Waterproof – 20A – max. Input 58V – 14S
Preço em loja: 77,95 €
72,50 € c/iva. - Preço exclusivo online
From the trusted manufacturer of BECs comes the next generation of voltage regulators. Designed and assembled in the USA1, Castle Creations’ CC BEC 2.0 gives users higher voltage ranges in two unique packages. For pilots there is a smaller, lightweight (0.7 oz.) design capable of 14 amps peak, perfect for sport flying, helicopters, and UAVs. Racers, crawlers, and other splashers can now integrate a 15 amp peak power regulator in a waterproof (WP), CNC machined, aluminum case. Both versions handle up to an impressive 14S without brake enabled or 12S with brake.
Castle Creations B•LINK Waterproof Bluetooth Adapter
Preço em loja: 84,95 €
81,28 € c/iva. - Preço exclusivo online
Control at your fingertips!
Castle Link™ ESC tuning is an essential component for customizing vehicle performance for many Castle Creations’ customers. While the controllers are plug and play, optimizing a Castle ESC through the Castle Link Programming Suite unlocks the full range of capabilities that set Castle apart from the competition. Users enjoy the ability to adjust many variables to enhance their experience including throttle, braking curve, drag brake, reverse type and more. The Castle B•LINK™ Bluetooth™ Adapter enables users to wirelessly program settings and view and download data logs on current Castle Creations ESCs, many older models and the BEC 2.0/BEC Pro on Apple iOS devices and now Android devices!
REQUIREMENTS:
- Apple devices require iOS version 10.0 or higher. Click HERE for a list of compatible devices.
- Android devices require version 5.0 or higher.
- WIRELESS BLUETOOTH COMMUNICATION allows you to interface with most Castle Link compatible ESCs and accessories to change parameters and update firmware.
- COMPACT AND LIGHTWEIGHT at 1.20" x .81" x .25" (30.48mm x 20.55mm x 6.55mm) and 0.23oz (6.62g), it can be installed in the vehicle or airframe without significantly increasing model weight.
- CONVENIENT WATERPROOF DESIGN allows you to quickly adjust settings in the field without disconnecting or disassembling the model. It can stay installed in the model or be easily swapped between models.
- FREE APP DOWNLOAD is readily available in the Apple App Store and Google Play. Once downloaded it does not require a data connection so it can be used in the most remote of areas and won’t use data.
- EASY TO USE application can be used with multiple B-Link Bluetooth Adapters or can store model information and allow you to use one adapter on multiple models.
- PASSCODE PROTECTED with (user-selectable) 4-digit code to prevent unwanted tampering with your settings.
- SYNC information between multiple devices by creating a free account (requires internet connection to sync database).
CASTLE Field Link (surface)
Preço em loja: 54,95 €
49,63 € c/iva. - Preço exclusivo online
Field Link Portable Programmer allows you to modify the most commonly used settings in your Castle controller at the touch of a single button.
Field Link for Driving settings:
Cutoff voltage
Auto LiPo cutoff volts per cell (3.0, 3.1, 3.2, 3.4, 3.5)
Drag brake
Brake strength
Punch control
Reverse type
Motor type
Motor timing and C.H.E.A.T. mode*
*C.H.E.A.T. mode is a feature of the Mamba Max Pro and Mamba X Series ESCs only.
This package includes one Field Link portable programmer specifically made to work with Castle surface controllers, and a USB cable.
CASTLE FIELD LINK PORTABLE PROGRAMMER FOR FLYING
Preço em loja: 47,10 €
44,99 € c/iva. - Preço exclusivo online
Program your controllers in the field!
NOTE: IF YOU ARE ATTEMPTING TO REDEEM A COUPON FOR A $10 CARD, PLEASE USE THIS PART NUMBER 011-0008-00 Field Link Portable Programmer allows you to modify the most commonly used settings in your Castle controller at the touch of a single button. Field Link for Flying settings:- Cutoff voltage
- Auto LiPo volts per cell (3.0, 3.1, 3.2, 3.3, 3.4, 3.5)
- Low voltage cutoff type
- BEC voltage setting*
- Motor timing*
- Motor direction
- Throttle type*
- Brake
- Governor gain*
CASTLE LINK V3 USB PROGRAMMING KIT
Preço em loja: 34,95 €
31,77 € c/iva. - Preço exclusivo online
NOW WITH MICRO-B USB CONNECTION PORT (Units manufactured after 3/20/18, older units used MINI-B)
NOTE: IF YOU ARE ATTEMPTING TO REDEEM A COUPON FOR A FREE CASTLE LINK ADAPTER, PLEASE USE THIS PART NUMBER 011-0007-00
Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit.
- Set up of programmable options with point and click ease
- View your current program settings
- Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more
- Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more
- Download new software updates as they become available
- All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs).
- Demo Mode allows users to check available settings without connecting their Castle device to the computer
- Simple to install software
- Expanded programming and parameters for all Castle ESCs
- Download the interface software from our Software area.
- Plug the Castle Link into the receiver lead on your controller and attach the micro USB cable included in the kit.
- Connect the USB cable to your PC.
CASTLE SERVO DIRECT CONNECT
Preço em loja: 12,40 €
11,95 € c/iva. - Preço exclusivo online
The Servo Direct Connect allows you to power a servo directly with an external BEC. Designed to be a simple plug-and-play solution and a cleaner option than Y-harnesses. It can be used with any Castle CC BEC and servo on the market.
Useful for power hungry servos that need a dedicated power supply; or when running a high voltage servo with receivers or other servos that need lower voltage. This allows you to use the ESC's internal BEC at lower voltage to power the receiver, and the external BEC, along with the Servo Direct Connect, to power the steering servo at higher voltages.
Package contains:
1 - Servo Quick Connect
1 - Heat shrink tubing
Installation Instructions:
1. Install BEC per manufacturer's instructions and adjust output voltage to desired level.
2. Connect the servo to pins on side of Servo Direct Connect marked "Servo".
3. Connect the BEC to pins on side of Servo Direct Connect marked "BEC".
4. Slide included heat shrink over servo and BEC connections and heat to shrink.
5. Connect servo wire from Servo Direct Connect to appropriate channel on receiver.
Note: The receiver will still need to be powered from another source. (ex: ESC's internal BEC, receiver battery back, separate BEC.)
(Wiring diagram)