Technical Specs | |
---|---|
Electronic Speed Control (ESC) | |
Input Voltage Range: | MIN: 2S LiPo MAX: 3S LiPo (12.6V) |
BEC Specifications: | Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V. Use of external BEC is recommended if using a high torque/speed digital servo; the CC BEC or CC BEC 2.0 Waterproof are recommended |
Operating Environment: | Waterproof* design allows for use in nearly any environment. |
Brake: | Proportional |
Reversible: | Yes, but can be disabled for racing |
On/Off Switch: | Yes, waterproof* |
Cooling Fan: | No |
Size: | Length: 1.6″ (41mm) Width: 0.75″ (19mm) Height: 1.1″ (28mm) |
Weight (without wires): | 1.20 oz. (34g) |
Connectors: | 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes Castle sensor harness. |
Items Needed for Operation: | Battery Connector required, Castle 4mm polarized Connectors, Deans Ultra Plugs, or Traxxas Power Connect are recommended. |
Product Use Statements: |
|
Application Guidelines: | Low speed crawling or trail running in vehicles weighing up to 8lbs. If you’re looking for a more aggressive setup, like rock racing and extended hill climbing it is recommend to run the Mamba X ESC with the same motor. |
Recommended Motors: | Combo includes 1406-1900kv sensored brushless motor. |
Max. Recommended Vehicle Weight: | 8lbs when used for low speed/moderate driving style; 4lbs for more aggressive driving styles. |
Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. |
Telemetry Link Capable: | Yes |
Tech Notes: | *Although the Micro X is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. |
Motor specs | |
Input Voltage Range: | 2S-3S LiPo |
Kv: | 1900 |
Max. RPM: | 100,000 |
Size: | Length: 49.5mm Diameter: 36mm |
Weight (w/wires): | 197 g / 6.9oz |
Shaft Size: | Length: 15mm Diameter: 1/8″ (3.17mm) Optional 5mm rotor replacement available. |
Mounting Hole Specifications: | M3 @ 25mm |
Cooling Fan: | Optional – Coming Soon |
Connectors: | 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire. |
Application Guidelines: | Ideal for 1:10 scale low speed rock crawlers/trail runners on 3S-4S weighing less than 8lbs. Can also be used in more aggressive setups in lighter 1:10 scale touring cars, stadium trucks or buggies weighing up to 5lbs. |
Max. Recommended Vehicle Weight: | 8lbs when used for low speed/moderate driving style like rock crawling and trail running; 4lbs for more racing and aggressive driving styles. |
Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. |
Avaliações
Ainda não existem avaliações.