ESC Technical Specs | |
---|---|
Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo (25.2V) (4s maximum with included 1412 – 3200kv motor) |
BEC Specifications: | Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V |
Operating Environment: | Waterproof* design allows for use in nearly any environment. |
Brake: | Proportional |
Reversible: | Yes, but may be disabled for racing. |
On/Off Switch: | Yes |
Cooling Fan: | Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) |
Size: | Length: 2.14″ (54.4mm) Width: 1.39″ (35.2mm) Height: 1.18″ (30.0mm) |
Weight (with wires): | 3.56 oz. (101g) |
Connectors: | 4.0mm female bullets for motor connection. |
Items Needed for Operation: | Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. |
Product Use Statements: | *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
Max. Recommended Vehicle Weight: | Up to 6.5lbs with included 1412 – 3200kv sensored motor. |
Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. |
Telemetry Link Capable: | Yes |
Tech Notes: |
|
Motor Technical Specs | |
---|---|
Input Voltage Range: | 2-4S LiPo |
Kv: | 3200 |
Max. RPM: | 75,000 |
Size: | Length: 62.5mm Diameter: 36mm |
Weight (w/wires): | 265.4g / 9.4oz |
Shaft Size: | Length: 15.5mm Diameter: 1/8″ (3.17mm) |
Mounting Hole Specifications: | M3 @ 25mm |
Cooling Fan: | Optional, coming soon! |
Connectors: | 4mm male Castle Bullet Connectors |
Application Guidelines: | Ideal for 2WD and 4×4 short course trucks, monster trucks and rock racers running up to 3s LiPo and weighing up to 6.5 lbs; it can be run on a 4s LiPo with very conservative gearing and keep a close eye on temperatures. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 4s LiPo. |
Recommended ESC(s): | Combo includes Mamba X ESC. |
Max. Recommended Vehicle Weight: | See application guidelines |
Tech Notes: | Running modes: SMARTSENSE™, Sensored only
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. |
Avaliações
Ainda não existem avaliações.