ESC Technical Specs | |
---|---|
Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo (25.2V) (3s max with included 1406-4600kv motor) |
BEC Specifications: | Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V |
Operating Environment: | Waterproof* design allows for use in nearly any environment. |
Brake: | Proportional |
Reversible: | Yes, but may be disabled for racing. |
On/Off Switch: | Yes |
Cooling Fan: | Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) |
Size: | Length: 2.14″ (54.4mm) Width: 1.39″ (35.2mm) Height: 1.18″ (30.0mm) |
Weight (with wires): | 3.56 oz. (101g) |
Connectors: | 4.0mm female bullets for motor connection. |
Items Needed for Operation: | Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. |
Product Use Statements: | *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
Max. Recommended Vehicle Weight: | Less than 5lbs/2.3kg , with batteries, ready-to-run with included 1406 – 4600kv motor. |
Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-Link Bluetooth Adapter (sold separately). |
Telemetry Link Capable: | Requires purchase of Futaba S.BUS™ Telemetry Link. S.BUS2™ extends Futaba S.BUS™ and supports bidirectional communication. Compatible radios will support S.BUS2 protocol. It is also necessary to utilize a compatible Futaba® Telemetry Receiver. Click here to view the Futaba® Radio Compatibility Chart. |
Tech Notes: |
|
Motor Technical Specs | |
---|---|
Input Voltage Range: | 2S LiPo |
Kv: | 6900 |
Max. RPM: | 100,000 |
Size: | Length: 49.5mm Diameter: 36mm |
Weight (w/wires): | 193g / 6.8oz |
Shaft Size: | Length: 15mm Diameter: 1/8″ (3.17mm) |
Mounting Hole Specifications: | M3 @ 25mm |
Cooling Fan: | Optional, coming soon! |
Connectors: | 4mm male Castle Bullet Connectors |
Application Guidelines: | 1/10th scale on-road cars for 2s use. Lighter off-road 1/10th stadium trucks and buggies with conservative gearing. NOT for use in 2WD or 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. |
Max. Recommended Vehicle Weight: | Up to 4lbs |
Tech Notes: | Running modes: SMARTSENSE™, Sensored only
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. |
Comparable Turn Count: | 2-Pole Equivalent Turn-Count Data Sheet |
Avaliações
Ainda não existem avaliações.