A mostrar 1–18 de 121 resultados

Ana-Digit Ltd AD Winch Controller

Preço em loja: 27,95 
24,90  c/iva. - Preço exclusivo online
PRODUCT INFORMATION:
  • Features:             
    • Suitable for RC crawler winch Fully remote operated by 1 channel Selectable remote control by a 2-step or a 3-step button / switch 2 selectable button operating modes, i.e. cyclic and direct control Automatic rewind-end detection Winch speed control by a dial knob or a VR or a button with direct control 4 selectable sensitivity levels for rewind-end detection Power supplied from a servo cable Miniature size Perfectly match with AD-RC03
    Specification:
    • Board Dimension:16mm x 32mm x 12mm Operating Voltage: BEC 5.0V / 6.0V Operating Current: Max 1.5A
    Package total weight: 12.00 grams (incl. packaging) Factory description: Ana-Digit Ltd AD Winch Controller

Basic Lighting System for 2015 Land Rover Defender D90 Body Set (Pick-up/SUV)

Preço em loja: 23,50 
21,68  c/iva. - Preço exclusivo online
Specifications:
  • 2x 5mm White LEDs
  • 4x 3mm Yellow LEDs
  • 3x 3mm Red LEDs
  • 3x 3mm White LEDs
  • 2x 2mm Yellow LEDs
  • 2x 2mm Red LEDs
  • DC Voltage: 4.5 V ~ 9 V
  • Control Voltage: 7.4 V
  • Operating Voltage: 7.4 V
  • Wire Length: 24.3in / 619mm
  • Total Weight: 1.26oz / 36.0g
Shown installed with RC4WD 2015 Land Rover Defender D90 Body Set (Z-B0215) for example (Not Included) Shown installed on RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Autobiography Limited Edition) (Z-RTR0043) for example (Not Included)

Castle – CC Bec 10A – max. Input 25V – 6S

Preço em loja: 36,95 
33,50  c/iva. - Preço exclusivo online
Our BEC's are small devices that eliminate the need for a receiver battery pack. They draw higher voltage from the motor batteries and drop it to a volt that is suitable for your receiver and servos. This is required in applications that draw high power for multiple servos or more than 3S LiPo's.

Castle – CC Bec 2 – Waterproof – 20A – max. Input 58V – 14S

Preço em loja: 77,95 
72,50  c/iva. - Preço exclusivo online
From the trusted manufacturer of BECs comes the next generation of voltage regulators. Designed and assembled in the USA1, Castle Creations’ CC BEC 2.0 gives users higher voltage ranges in two unique packages. For pilots there is a smaller, lightweight (0.7 oz.) design capable of 14 amps peak, perfect for sport flying, helicopters, and UAVs. Racers, crawlers, and other splashers can now integrate a 15 amp peak power regulator in a waterproof (WP), CNC machined, aluminum case. Both versions handle up to an impressive 14S without brake enabled or 12S with brake.

Castle Creations B•LINK Waterproof Bluetooth Adapter

Preço em loja: 84,95 
81,28  c/iva. - Preço exclusivo online
Control at your fingertips! Castle Link™ ESC tuning is an essential component for customizing vehicle performance for many Castle Creations’ customers. While the controllers are plug and play, optimizing a Castle ESC through the Castle Link Programming Suite unlocks the full range of capabilities that set Castle apart from the competition. Users enjoy the ability to adjust many variables to enhance their experience including throttle, braking curve, drag brake, reverse type and more. The Castle B•LINK™ Bluetooth™ Adapter enables users to wirelessly program settings and view and download data logs on current Castle Creations ESCs, many older models and the BEC 2.0/BEC Pro on Apple iOS devices and now Android devices! REQUIREMENTS:
  • Apple devices require iOS version 10.0 or higher. Click HERE for a list of compatible devices.
  • Android devices require version 5.0 or higher.
A complete listing of compatible ESCs and accessories can be found here. The free Castle Link app for iOS is available on the Apple App Store for use with iPhones and iPads, and Google Play for Android devices. Once downloaded, it does not require a data connection and can be used anywhere, including remote areas. FEATURES:
  • WIRELESS BLUETOOTH COMMUNICATION allows you to interface with most Castle Link compatible ESCs and accessories to change parameters and update  firmware.
  • COMPACT AND LIGHTWEIGHT at 1.20" x .81" x .25" (30.48mm x 20.55mm x 6.55mm) and 0.23oz (6.62g), it can be installed in the vehicle or airframe without significantly increasing model weight.
  • CONVENIENT WATERPROOF DESIGN allows you to quickly adjust settings in the field without disconnecting or disassembling the model. It can stay installed in the model or be easily swapped between models.
  • FREE APP DOWNLOAD is readily available in the Apple App Store and Google Play. Once downloaded it does not require a data connection so it can be used in the most remote of areas and won’t use data.
  • EASY TO USE application can be used with multiple B-Link Bluetooth Adapters or can store model information and allow you to use one adapter on multiple models.
  • PASSCODE PROTECTED with (user-selectable) 4-digit code to prevent unwanted tampering with your settings.
  • SYNC information between multiple devices by creating a free account (requires internet connection to sync database).
    

CASTLE Field Link (surface)

Preço em loja: 54,95 
49,63  c/iva. - Preço exclusivo online

Field Link Portable Programmer allows you to modify the most commonly used settings in your Castle controller at the touch of a single button.

Field Link for Driving settings:

Cutoff voltage

Auto LiPo cutoff volts per cell (3.0, 3.1, 3.2, 3.4, 3.5)

Drag brake

Brake strength

Punch control

Reverse type

Motor type

Motor timing and C.H.E.A.T. mode*

*C.H.E.A.T. mode is a feature of the Mamba Max Pro and Mamba X Series ESCs only.

This package includes one Field Link portable programmer specifically made to work with Castle surface controllers, and a USB cable.

CASTLE FIELD LINK PORTABLE PROGRAMMER FOR FLYING

Preço em loja: 47,10 
44,99  c/iva. - Preço exclusivo online

Program your controllers in the field!

NOTE: IF YOU ARE ATTEMPTING TO REDEEM A COUPON FOR A $10 CARD, PLEASE USE THIS PART NUMBER 011-0008-00 Field Link Portable Programmer allows you to modify the most commonly used settings in your Castle controller at the touch of a single button. Field Link for Flying settings:
  • Cutoff voltage
  • Auto LiPo volts per cell (3.0, 3.1, 3.2, 3.3, 3.4, 3.5)
  • Low voltage cutoff type
  • BEC voltage setting*
  • Motor timing*
  • Motor direction
  • Throttle type*
  • Brake
  • Governor gain*
*If applicable to your ESC. Please check "Specifications" section for full list of functions. This package includes one Field Link portable programmer specifically made to work with Castle air controllers, and a USB cable. For surface controllers, see the Field Link for Driving.

CASTLE LINK V3 USB PROGRAMMING KIT

Preço em loja: 34,95 
31,77  c/iva. - Preço exclusivo online
NOW WITH MICRO-B USB CONNECTION PORT (Units manufactured after 3/20/18, older units used MINI-B) NOTE: IF YOU ARE ATTEMPTING TO REDEEM A COUPON FOR A FREE CASTLE LINK ADAPTER, PLEASE USE THIS PART NUMBER 011-0007-00 Program your Castle brushless ESCs and accessories on your Windows® PC with the Castle Link USB programming kit.
  • Set up of programmable options with point and click ease
  • View your current program settings
  • Air users can customize values for low-voltage cutoff, prop brake strength, governor gain and more
  • Surface users can customize values for low-voltage cutoff, drag brake, torque limiting and more
  • Download new software updates as they become available
Simple programming interface featuring:
  • All-in-one support for all Phoenix, Talon, Thunderbird, QuadPack, DMR, Mamba, Sidewinder, and Hydra controllers, as well as accessories like Telemetry Link, as well as all of our external switching regulators (BECs).
  • Demo Mode allows users to check available settings without connecting their Castle device to the computer
  • Simple to install software
  • Expanded programming and parameters for all Castle ESCs
Set-up instructions:
  1. Download the interface software from our Software area.
  2. Plug the Castle Link into the receiver lead on your controller and attach the micro USB cable included in the kit.
  3. Connect the USB cable to your PC.
For more information, see the Castle Link software page. For more information about the Castle Link software, visit the Downloads page. Castle Link contains a proprietary interface adapter and standard USB cable with micro-B port. All you need is an available USB port on your PC. System Requirements: Castle Link is compatible with Windows Vista, Windows 7, Windows 8, Windows 10 and Windows 11. Note: Macintosh users may take advantage of software such as Parallels DesktopVMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10. to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.

CASTLE SERVO DIRECT CONNECT

Preço em loja: 12,40 
11,95  c/iva. - Preço exclusivo online
The Servo Direct Connect allows you to power a servo directly with an external BEC. Designed to be a simple plug-and-play solution and a cleaner option than Y-harnesses. It can be used with any Castle CC BEC and servo on the market. Useful for power hungry servos that need a dedicated power supply; or when running a high voltage servo with receivers or other servos that need lower voltage. This allows you to use the ESC's internal BEC at lower voltage to power the receiver, and the external BEC, along with the Servo Direct Connect, to power the steering servo at higher voltages. Package contains: 1 - Servo Quick Connect 1 - Heat shrink tubing Installation Instructions: 1. Install BEC per manufacturer's instructions and adjust output voltage to desired level. 2. Connect the servo to pins on side of Servo Direct Connect marked "Servo".
3. Connect the BEC to pins on side of Servo Direct Connect marked "BEC".
4. Slide included heat shrink over servo and BEC connections and heat to shrink.
5. Connect servo wire from Servo Direct Connect to appropriate channel on receiver.
Note: The receiver will still need to be powered from another source. (ex: ESC's internal BEC, receiver battery back, separate BEC.) (Wiring diagram)

CASTLE TELEMETRY LINK FOR SPEKTRUM X-BUS

Preço em loja: 82,95 
74,18  c/iva. - Preço exclusivo online

Knowledge is Power!

Maybe you want to know the voltage of your onboard battery(s), the RPM the motor is turning or the temperature of your ESC. In this day and age R/C is not just one way communication anymore. Traditional radio systems transmit signals from the controller to the receiver, but Telemetry-capable systems also send real-time data from your model back to your transmitter. The X-BUS Telemetry Link was developed based on communication protocol disclosed from Spektrum® for use with specific Spektrum® radios and compatible Castle Creations ESC’s. Telemetry data can be displayed on the transmitter screen, or notify you when a defined threshold is exceeded, (battery voltage, ESC temperature, etc.) you can configure a vibration or sound alert from the radio. Let’s start from the beginning. Why should I integrate Telemetry into my models? Telemetry has the potential not only to improve the safety of our models by monitoring battery voltages, ESC temperature, and other critical parameters, but it also creates other opportunities to get even more fun out of flying because it essentially reduces the risk of “unknown” inevitable crashes. Think of the benefits to be had from alarms that will sound to warn you if your ESC is running hot or if your receiver battery is running unexpectedly low. Note: Not officially compatible with any Spektrum surface transmitters. Compatibility requires specific software in the transmitter that has not been provided by Spektrum for any of their surface transmitters.

CC BEC 2.0 VOLTAGE REGULATOR

Preço em loja: 62,95 
58,95  c/iva. - Preço exclusivo online
From the trusted manufacturer of BECs comes the next generation of voltage regulators. Designed and assembled in the USA1, Castle Creations’ CC BEC 2.0 gives users higher voltage ranges in two unique packages. For pilots there is a smaller, lightweight (0.7 oz.) design capable of 14 amps peak, perfect for sport flying, helicopters, and UAVs. Racers, crawlers, and other splashers can now integrate a 15 amp peak power regulator in a waterproof (WP), CNC machined, aluminum case. Both versions handle up to an impressive 14S without brake enabled or 12S with brake.

CC BEC PRO 20A MAX OUTPUT, 12S (50.4 VOLTS) MAX INPUT SWITCHING REGULATOR

Preço em loja: 69,95 
62,90  c/iva. - Preço exclusivo online
Power Management CC BEC Pro (Battery Eliminator Circuit) is a small device that eliminates the need for a receiver battery. It draws voltage from the motorbatteries and drops it to a voltage level that is suitable for yourreceiver and servos. This is required in applications which use high-power servos, where the ESC does not have an internal BEC, or the existing BEC is inadequate. The CC BEC Pro is designed to operate at up to 12S LiPo (50.4V) with a 20A* peakservo load. Generally used for 1/5 scale cars or cars utilizing multiple high powered digitalservos, lights, winches and other accessories. It is also useful in larger airplanes using 4 or more digital servos. Perfect for 500 size or largerhelis.

Flysky Voltage Sensor CVT01 ibus

Preço em loja: 8,80 
7,15  c/iva. - Preço exclusivo online
Technical Specifications
Voltage Measurement Range: -100V bis 100V (+/-)
DC Power: 4.0-8.4V
Data Port: i.bus / (sens)
Temperature Range: 0°C to +60°C
Max. Humidity: 20%-95%
Size: 31x15x8.5mm
Weight: 6.0g
Compatible with: several FlySky-Transmitter & Receivern like: PL18, NV14, NB4, i10, etc.

HobbyTech LED spotlight bridge aluminum oval – 61mm

Preço em loja: 19,99 
12,90  c/iva. - Preço exclusivo online

Hobbywing AXE Extended Wire Set 120mm

Preço em loja: 22,90 
19,50  c/iva. - Preço exclusivo online
This sensor extension wire is applicable in case that the regular sensor wire is not long enough when using the AXE power system combo. Length: 120mm.

Hobbywing BEC 10A HV Air UBEC Regler for 3-14s

Preço em loja: 43,90 
37,75  c/iva. - Preço exclusivo online
The UBEC uses a high-performance DC voltage regulator with switching module that draws its voltage from 3-14S LiPos. With it the regulator gives out 10A extremely stable or for a short amount of time 25A.Therefore this UBEC provides power for all kinds of RC modell devices. It is also suitable for fixed wing aircraft.

Hobbywing BEC 10A V2-Car UBEC Regler for 2-6s

Preço em loja: 33,90 
28,15  c/iva. - Preço exclusivo online
The UBEC uses a high-performance DC-DC switching module that draws its voltage from 2-6S LiPos. The module regulates the voltage down to a previously defined value that is required by the receiver or other electronic devices. This is extremely stable and the output current is permanently up to 10A or briefly at 15A. Because this UBEC is not only powerful, but also waterproof and dustproof, it is particularly suitable for the use in rock crawlers.

Hobbywing BEC 25A UBEC ESC for 3-18s

Preço em loja: 81,90 
71,95  c/iva. - Preço exclusivo online
With the Hobbywing UBEC 25A HV you supply your receiving system safely and efficiently with power from a connected LiPo battery of 3 - 18s. A big advantage of the Hobbywing UBEC is the option of selecting the output voltage for the servos used. This is adjustable in four steps from 5.2V up to 8.4V. For optimal security of the power supply, there is the option of connecting an external, additional backup battery. This automatically takes over the supply if the main battery should be empty or defective. This powerful UBEC is used in large helicopters and planar models with correspondingly powerful servos and the corresponding number.